Coker Wooden Wheel Workshop

Sponsor Story

How It’s Made: Wooden Wheels:

Coker Tire Expands Its Chattanooga, TN Facility to Include A Full Wood Shop

Sponsored By:Coker Tire Logo

Coker Tire is known for its full line of bias ply and radial tires for collector vehicles. As the company continues to grow, it now offers a wide variety of steel wheels in its catalog of products. CEO Corky Coker has a huge interest in early automobiles, especially those from the 1900’s through the 1930’s. In that era, it was common for cars and trucks to feature wooden wheels. Knowing the difficulty of sourcing new wooden wheels for his own project vehicles, Corky decided to add another element to his company. Coker Tire now manufactures brand new wooden wheels for all manner of antique automobiles in its Chattanooga, Tennessee headquarters.


The task of building wooden wheels is a huge undertaking, but it allows Coker Tire to offer customers complete tire and wheel packages for vehicles that feature specialized wheel designs. Another important aspect in this process is the manufacturing of steel rims and hardware for vehicles with wooden wheels. The machining and metal work is also handled in house at Coker Tire’s facility. This is not a production line that cranks out hundreds of wheels per day - the wooden wheel and machine shop specialize in custom orders, so this isn’t an overnight process. In most cases, samples of the original wheel are required to provide a pattern for the machine shop and the wooden wheel shop. It is a labor-intensive job, but Coker Tire has the right team for the job. Jonathan Myren is the wood shop guru, while Johnathan Sullivan helps in the wood shop when needed.


In this article, we’re going to showcase the process of building handcrafted wooden wheels. There are hundreds of steps involved in building a new set of wooden wheels, but we’re condensing it down to the nuts and bolts of it for your viewing pleasure. Take a look at how Coker Tire builds brand new wooden wheels, and give them a call if you’re car needs tires, wheels, tubes, or all of the above.

Coker Technicians
1 - All wooden wheel orders require that the customer send in an existing wheel from their project vehicle. This allows Coker Tire to accurately measure the spokes, the felloes and determine the hub diameter.

Wooden wheel samples
2 - While some customers send in a complete wheel, others only send small samples of the wheel, due to prior damage. Either way, the wheel and parts are disassembled for proper analysis and measurement.

Rack of spoke patterns
3 - Coker Tire has hundreds of spoke patterns in its wood shop. These patterns save a lot of time, as the pattern can be placed in the duplicator machine without any major work. If a pattern isn’t available, Jonathan must make a new one from an existing spoke.

hickory blocks
4 - Spokes start life as kiln dried hickory, and they are rough cut into blocks. Jonathan cuts the blanks to a specific width and length, based on the final spoke size.

trimming the spoke
5 - Jonathan is seen here trimming the length of the spoke. He will then center punch the spoke (guide h*** for the duplicator), and give it a rough cut on the band saw, based on the pattern spoke design.

spoke in duplicator
6 - This is what the rough-cut spoke looks like when it is loaded into the duplicator machine. The machine can cut four spokes at a time, and the result is a shaped and sanded spoke in a matter of minutes.

spoke honed in lathe
7 - Rapidly spinning blades make quick work of the spokes, while a rubber wheel rolls across the pattern spoke to provide a template for the machine. After the initial cuts are made, a belt sander follows behind to provide a smooth finish.

spoke on jig for angle adjustment
8 - After the spokes are duplicated, it’s time to cut the appropriate angle on the hub side of the spoke. This is performed using a special jig attached to a table saw. Spoke count determines the necessary radius.

spokes assembled on hub
9 - The customer is required to send new hubs for wheels (that is the only aspect that Coker Tire does not fabricate). The hub is used to assemble the array of spokes to ensure proper fitment. Then, the spokes are cut to length and doweled on the ends.

alt room of wooden blanks
10 - Wooden blanks are kept in a climate controlled room to preserve the dryness of the hickory wood. The half circles are blanks for felloes, which are the wooden rim that attaches to the outer steel rim.

technicians stretching felloes
11 - After Jonathan drills the felloes and cuts them to the appropriate length, it’s time for some muscle, as the felloes are stretched to fit the spoke array. This requires brute force, and in this case, a modified bumper jack, a huge pry bar and a hammer.

felloes pressed into place
12 - With the felloes stretched over the spokes, the wheel can be placed on a special clamping table. The felloes are pressed onto the doweled spokes until a flush fit is achieved.

custom detail closeup
13 - It’s important to note that many automobile manufactures had custom details made into the wooden wheels. In this case, the felloe has a detailed boss for the spoke, which requires a great deal of patience to replicate. These areas will be hand-sanded for a perfect finish.

finish sanding the wheels
14 - Jonathan has a custom jig that allows him to comfortably finish sand the wheels. He uses various grits to smooth out all of the transitions, so the wheels will be ready for primer before they leave the shop. Please note that Coker Tire does not offer paint services on wooden wheel builds.

cutting felloes to the final diameter
15 - At this point, Jonathan is ready to cut the felloes to the final outer diameter. In order to do this, he must measure the inside diameter of the steel rim. The idea is to build the wooden felloe to be about 1/8-inch too large for proper fitment.

cutting the spokes off the finished wheel
16 - The machine that cuts the spokes offers a solid mounting point for the wheel, so that the finished wheel is perfectly round. Jonathan measures several times during this process to ensure correct sizing.

finishted wheel clampled to table
17 - After the felloe is cut to size, the wooden wheel is clamped to a special table. This is to keep the wheel steady when it’s time to install the steel rim onto the wooden felloe.

super heating the rim for installation
18 - A custom heating table super heats the steel rim, so that the steel expands. That explains why Jonathan shaves the felloe to be slightly oversized.

mounting the super heated rim to the wheel
19 - The super heated rim is placed over the completed wooden wheel. It is then quenched with water, which causes the steel to contract and create a super strong bond between the wood and the steel.

finished wheel inspection
20 - Corky Coker looks on as Jonathan inspects the completed wheel, which is ready to be completed with vintage-style hardware and sent to its customer.

Coker Tire Company

Visit Coker Tire to learn more

Views: 291


You need to be a member of The Vintage Racing League to add comments!

Join The Vintage Racing League

© 2022   Created by Travis Buckingham and Stephen Page   Powered by Buckingham Creative

Badges  |  Report an Issue  |  Terms of Service