Miller Dialarc 250 TIG Welder - have too much shop equipment! - SOLD

Miller Dialarc 250 TIG welder with Bernard water cooler. This is an older machine but works incredibly well. 250 amp AC or DC with high frequency means it will weld any common material and some not so common including steel, aluminum, magnesium, titanium and stainless steel. You can use it for sheet metal or heavy plate and castings. We have used it for our race car fabrication chores for many years without a problem. The exterior panels of both the welder and water circulator have been powder coated. Comes with a Weldcraft WP-20 water cooled torch, the Bernard water circulator, Miller foot pedal ,argon regulator, all associated wiring and hoses and a heavy duty castered cart with which to roll it around. It does not include the argon bottle. The only known issue is a seal in the bronze water pump which has begun to leak a little with only minor drips. This machine does not have some of the bells and whistles of the newer machines but is sound, reliable and does ASME quality welds. We are moving to a new facility and have new equipment coming. $1750

Views: 65

Attachments:

Reply to This

Replies to This Discussion

Some clue as to location would be helpful
I'm in Dallas. The machine is heavy but can be shipped by truck.

Robert

RSS

© 2024   Created by Travis Buckingham and Stephen Page   Powered by Buckingham Creative

Badges  |  Report an Issue  |  Terms of Service