hI --LOOKING FOR ANY DETAILED DRAWINGS OF BRITISH SALMSON ENGINE(4 CYL) AS IAM BUILDING ONE AT THIS TIME OUT OF A PILE OF COMPONENTS. CHEERS BRIAN WALTON

Views: 86

Reply to This

Replies to This Discussion

Hi Brian,
I am having trouble working your website. Contact me with a list of the British Salmson drawings that you need.
the BS owners club has remanufactured numerous spares including heads and blocks.
vintagejohn@btinternet.com
Hi thanks for that --ive finnished engine now and is running great -- have all the drawings on computor now --for any future referance. - There does seem to be trouble with this engine getting oil pressure up --have found some debry in oil pump which dropped pressure also the spring in the pump would seem to be criticle. kind regards Brian
BSOC discussing getting new oil pump pressure relief springs made at present.
Inspect oil pump closely to check that oil does not escape out of bottom plate when hot.
(shadow marks on plate on the inside.) Sometimes better to make a slightly thicker base plate.
Where did you find your BS drawings?
John
Hi the chap Iwas building engine for supplied them (John Kent a newish member of the S O C ). re Brian
I hope you check the new oil pump before fitting!
Cheers
John

RSS

© 2020   Created by Travis Buckingham and Stephen Page   Powered by Buckingham Creative

Badges  |  Report an Issue  |  Terms of Service